If your vagcom comes with ft232bm/bl chips, don't worry you only need to do some work We need to invert RI # and DSR # signals to fool the detection of battery and ignition, in order to be able to encode.Ĭheck your I / O Controls settings, them must be like this: Prog 3.5" () to modify the programming of the eeprom FT232RL, Now we need to adjust the serial port, press the Windows key and Pause (both), then follow these images (sorry my XP is in spanish language)ĥ# Download the "M. I preferred to catch it on ebay, because it was more comfortable and cheaper than going to catch the pieces out there, also for those wishing to DIY, I leave the chart with specific connections.ģ# Open your vagcom and solder obd2 pins 7 and 8, which are the K lines, otherwise you will not be able to access to all modules from the carĤ# If you have buyed vagcom with ftdi 232 rl, for the software mod, you will need this driver "CDM WHQL certified" (), so unpack it, connect the cable, and install all with this driver. why? well basically because that chip support software mods.Ģ# As my 530d do not have odb2 connector, I order a cable adapter from obd2 to 20 pin bmw, ebay seller is ( Car.Doctor ) another 8 ***8364 + shipping. Hi guys, first of all, this isn't new but all info is spread over there and it's a bit difficult to get all info together so i made this postġ# buy some Vagcom cable KKL 409.1, just 8 ***8364 + shipping from ebay, ask the seller if it has the chip FT232RL.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |